AquaSPArkle pH Plus is a granular product used to increase the pH of hot tub water.
Problems caused by low pH include skin and eye irritation, corrosion of pumps and heater elements, pitting and etching on acrylic surfaces.
Use: AquaSPArkle pH Plus should be pre-dissolved in a small plastic container filled with spa water. Add 10g (or approximately 2 teaspoons) of granular product to a litre of warm spa water and carefully add the resulting solution to the spa whilst the pumps are turned ‘on’.
Re-check after 30 minutes and repeat as necessary.
Compatible with all spa sanitizers.
NB If you are unable to maintain an appropriate pH level in your tub the most likely cause is that the the Total Alkalinity is too low. Always correct the Total Alkalinity balance before you attempt to balance the pH.
