Please Note:

Wizards New Hot Tub & Outdoor Living Showroom is now open!

Need help with a hot tub repair? Need help?

FREE Delivery

Free DPD Delivery For Orders Over £60

Nationwide Delivery

Delivery right to your door

Pay Later

Spread the cost with Klarna

Sale!

Balboa HA440NG 1 Speed 1.5 HP Pump

Original price was: £385.67.Current price is: £359.99.

In stock


Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed – 79mm Centre Suction x 79mm Side Discharge

The Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed MPN -1023063 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.

  • Power reference: 1.5 HP 1 speed
  • Volts: 230
  • Hz: 50
  • Wet End Impellor HP: 1.5
  • RPM Low / High: 2900
  • Amps Draw:5.6 A
  • Frame Size: 48F
  • Plumbing connections: 2-inch suction and discharge ports
  • Electrical connections: Supplied with a 3-core cable and AMP plug
  • Length: 390 mm Height: 230 mm Depth: 190 mm
  • Commonly used with: This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas. It’s also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed. This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.
Share this product

Balboa HA440NG 1 Speed 1.5 HP Pump

The Balboa HA440NG Single-Speed Pump, rated at 1.5 HP, is designed for spa and hot tub applications, offering reliable performance comparable to the older 2 HP HA440 model.

It operates at 2,800 RPM with a current draw of 5.7A and features a TEFC motor with an IPX5 rating for added protection. The pump includes a carbon ceramic seal with Viton® elastomers, 2-inch suction and discharge ports, and comes with a 3-core cable and AMP plug.

Commonly used as a replacement for HA440 Magnaflow models and is frequently found in Spaform hot tubs. If you are purchasing this pump to replace an older version of the Magnaflow range, the existing unions with buttress threads will fit and seal correctly as long as the extra thick 2.0″ flat gasket is used on the discharge port (QF3276)

If you are replacing a Spa Form pump, then normally the part numbers will be 95-4409-SF for single speeds and 95-44092-SF for two speeds.

Also available Balboa HA440 Pump 2spd 1.5HP https://www.wizardhottubs.co.uk/product/balboa-ha440ng-2-speed-1-5-hp-pump-2/

Additional information

Weight 5 kg
Scroll for more information