Request a quote

    Request a Quote



    FREE Delivery

    Free DPD Delivery For Orders Over £60

    Nationwide Delivery

    Delivery right to your door

    Pay Later

    Spread the cost with Klarna

    Balboa Heat Pump Relay Kit

    £75.43

    Out of stock


    Balboa Heat Pump Relay Kit

    This PCB is used in the BP200UX Balboa System to add a 1 speed pump.

    • Manufacturers part number:59081
    • Length: 65mm Height: 50mm Width: 40 mm (base) + Cable Length Cable Length: 350 mm
    • Commonly used with:BP systems

    We are Proud to be 1 of the UK’s official distributors of Balboa hot tub parts.

    Share this product

    Balboa Heat Pump Relay Kit

    The Heat Pump Relay Kit once installed into a Balboa Spa Pack enables you to connect a third party Heat Pump to your system.

    Suitable for BP2100 & BP601 series Spa Packs.

    Can be setup to have the Heat Pump run instead of the Pack’s electric heater or at the same time/simultaneously.

    But the Heat Pump is not integrated and CANNOT be controlled from the Topside controller. It would require setting via its own controls.

    The Heat Pump must have its own flow detection.

    • Power: Volts: 230 Hz:50
    • Length:65 mm Height: 50 mm Width: 40 mm (base) + Cable Length Cable Length: 350 mm
    • Compatible With: BP systems

     

    IMPORTANT INFORMATION:
    Circuit boards and other computerised equipment are exempt from our returns policy if they have been opened or installed.
    If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.

    This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.

    Scroll for more information