Whirlpool Bath DIY Kit with 6 Chrome Jets
Our super easy to install kit comes with all you need to turn your bath into a 6 Jet whirlpool bath. Includes easy to follow instructions.
What’s included:
- 1 x Bath Pump
- 2 x 50CM x 1.5 inch Water intake pipe + 1 x 1.5 inch Connector
- 1 x 3 metres of 1 inch flexi pipe for water
- 1 x 3.5 Metres of 8mm x 13mm White flexi pipe for air
- 6 x Chrome Jet shrouds, eyeballs and O rings
- 6 x Jet venturi locknuts
- 6 x Jet venturi shrouds with T pieces
- 1 x Chrome water intake cover with screws
- 1 x Water intake 90 degree 1.5” elbow
- 1 x Water intake locknut
- 1 x Chrome on/off button + plastic backing nut
- 1 x 8 Port manifold
- 2 x 1” End caps
- 1 x Tube of silicone
- 1 x Tub of pipe cement
- 1 x 2 Metre piece of clear 6mm air pipe for chrome on/off button
- 1 x 1½ x 1 x 1” tee pump union
- 1 x 1½ x 1 x 1” Straight pump union
- 2 x Plastic pump stands
- 6 x Black rubber bungs for manifolds
- 4 x Pump stand bolts
- 2 x 30cm lengths of 1.5” pipe for pump to stand and intake
- 1 x Set of instructions
Please note the following are not included;
- Bath
- Pen for marking positions of jets
- Power drill
- 60mm hole cutter
- 43mm hole cutter
- Hacksaw
- Measuring Tape
- Methylated spirits
