Gecko in.touch 3+ Total Spa Control, Anywhere, Anytime
The Gecko in.touch 3 (v3) system gives you full control of your spa from virtually anywhere through the easy-to-use Gecko mobile app. Connected to your home network, the two pre-paired modules plug directly into any compatible spa pack and your router—no complex setup, no Wi-Fi boosters required.
Using the app, you can remotely manage spa temperature, filtration cycles, pumps, music, and receive real-time system alerts straight to your smartphone.
A Seamless Replacement
The in.touch 3+ is an ideal substitute for our discontinued in.touch 2, offering improved reliability, easier setup, and enhanced functionality.
- Operating temperature: 20 °C to 60 °C
- Storage temperature: 30 °C to 85 °C
- Humidity: up to 85 % non-condensing
- Water ingress protection: IPX5 (CO module)
- Power input (EN module): 100240 V AC, 50/60 Hz via supplied PSU (UK/EU plugs)
- Network: 100 Mbps RJ45 LAN; requires Port 10022 open
- Compatibility: Gecko Y-Series (in.yt, in.ye, in.yj) and X-Series (in.xe, in.xm²), version 2 and higher (2012-onwards) Please note that the in.touch 3+ is not compatible with IN.XM and IN.XE control boxes.
N.TOUCH 3+ Kit includes:
- 2 communication transmitters: In.touch 3 Spa transmitter (2 m cable) & In.touch 3 home transmitter
- Ethernet cable (0,9 m)
- Wall mount power adaptor and wire (0,9 m)
| Feature | in.touch 3 | in.touch 3+ (with waterlab system) |
|---|---|---|
| Mobile remote control | Yes | Yes |
| Over-the-air system updates | Yes | Yes |
| Long-range RF connectivity (868/915 MHz) | Yes | Yes |
| No Wi-Fi boosters or repeaters required | Yes | Yes |
| Gecko Waterlab integration | No | Yes |
| Real-time water quality data | No | Yes |
| AI-driven water analytics & treatment advice | No | Yes |
| One-button probe calibration & firmware rollback | No | Yes |
